Supplying Demand 316233903 316217008 Range Oven Interior Temperature Sensor Probe Replacement Model Specific Not Universal
79
Adams Parker
Product Images
Product Features
- 【Replace model】Range switch 316436000 replace: 316021500, 1155394, EA1145039, PS1145039, AH1145039, AP3890378.
- 【Fits Brand】Range Switch 316436000 is mainly compatible with the following series of brands: for Frigidaire. And it is compatible with multiple series of electrical appliances such as for BGEF, for BKEF and for CCRE; Specific models include but are not limited to for BGEF3032KBA, for BKEF3048LSB, for CCRE312GWWA etc.
- 【Adapted or not】The 316436000 switch controls a smaller heating element (6 inch). Before purchasing, you can compare the appearance and size with the original parts to ensure that the replacement parts are compatible with your household appliances.
- 【Quality】All 316436000 Range Switch are unopened new products, manufactured with premium materials for durability and exact fit, with no rust on the metal surface and precise dimensions.
- 【After Service】 : After each customer purchases the range switch 316436000, if there is any problem with the product, please leave us a message through Amazon.
- Replacement Oven Stove Range Clock Timer Control Board .
- Replaces Part number # 316455410，AP6886161, 316222802, 316222802R, 4931113, 5304427745, PS12717913，790.71202704，316455520，3316450.9019，316505601，316222800，316222810，5304518661.
- Refer to your manual to ensure ordering the correct, compatible part.
- Turn off power to the stove at the breaker box before attempting any repairs. Remove the screws from the control board cover and gently lift the panel up to expose the 316455410 Range Control Board. Disconnect the plug from the wiring harness and carefully remove the board.
- If for whatever reason, you decide you are not satisfied, you can request a replacement or a full refund, no questions! Please feel free to contact with us if you are not sure this kit fits your model ,please feel free to email us or comment in Q&A.
Product Specifications
| Product Dimensions | 7.6 x 4.1 x 2.1 inches |
| Item Weight | 8.8 ounces |
| Manufacturer | Apzte |
| ASIN | B0BZRY9LRN |
| Country of Origin | China |
| Item model number | 316455410 316220725 5304518661 |
| Date First Available | March 28, 2023 |
Didn't find the right price? Set price alert below
Set Alert for Product: 316436000 316021500 Surface Burner Control Switch Fits Frigidaire 6 Inch Range Surface Element Control Switch Replacement Replace Model: 1155394, EA1145039, PS1145039, AH1145039, AP3890378 -
Product Price History
-
![[1607744627] [9781607744627] The Prediabetes Diet Plan: How to Reverse Prediabetes and Prevent Diabetes through Healthy Eating and Exercise-Paperback](https://m.media-amazon.com/images/I/711cMO7ILoL._AC_SL520_.jpg)
Wrong part but works great. Was the wrong part. Was an emergency as the oven broke right before thanksgiving so I rewired it using the new sensor and cutting out the quick connect. Works with some modification. Wish the wiring inside was thicker so it didn’t break so easy when trying to rewire. But works within the same temperature range as my oven even though the connector wasn’t anywhere near the same. I used it on a Kenmore 78048783901 electric wall oven.
Not An Exact Replacement But – 😕. Our Kenmore oven was not baking cakes and pies right. It was taking quite a bit more time than my wife was used to and the recipes called for. So I resorted to the old oven thermometer test. Now I know from my experience that all ovens vary somewhat, however our oven was off and the temp varied. As there are only 3 things in the circuit; the oven element, the temp sensor probe and the control board, I checked what I could with a meter. The element was good and actually the temp sensor probe checked out okay. However the temp sensor probe is nothing more than a thermistor (a variable resistor that changes based on the temperature) and there is really no way to tell if it is changing resistance correctly. To test one, you merely Ohm it out at room temp (70 degrees) and it should read anywhere from 1K – 1.1K Ohms. I went with the cheapest part to try first.This Supplying Demand 316233903 Interior Oven Sensor Probe was NOT an exact replacement part in that the molex plug and terminals were different from the plug and terminals in the original. You may need to modify the part to make it work. Keep in mind there is only a small amount of current going thru the wire to tell the control board the oven temperature. If your original sensor probe is different, you only need to connect and isolate the two wires to effectively connect the sensor probe. I cut the wire and used the high temp insulation from the original sensor probe to shield my connections. If you feel you don’t have the experience to do this, I suggest you leave it to a qualified repairman or a trusted friend. After replacement I checked the temperatures with an oven thermometer and found them to be off. I would set it for 325, then 350, then 375 then 400 and repeat. I went into the offset settings on the control board and adjusted it according to my findings. So far the repair seems to have been a success. I took off 1 Star because of the need to adapt the connection. It would be so nice if there was a pigtail included that would allow for the connection to the various OEM temperature sensors. Thanks for reading. I hope this review helps others to decide – ✌😉
Connector has flat not round pins. The connector has flat blade pins instead of round pins like the one I replaced. I cut off the factory connector and used wire nuts on the very short pig tail. Perhaps I did not look close enough at the picture of the connector to verify it matched range connector. Far as I know so far, it is working OK. If the the connector had matched, I could have replaced it in a couple of minutes.
Should work. I bought the wrong product but i measured it with multimeter and the omhs is correct for the room temperature.
Not compatible with my stove. I ordered this because my stove’s serial number was listed as compatible, however when I received it I discovered it didn’t work. On the plus side it was brand new and the quality was excellent.
Worked for 5 months but has stopped working all of a sudden. We received this and although it was a little different it installed easily. Some of the options were different (only and high and low heat options for broiler) but otherwise worked normally. Then yesterday it stopped working again, will not send a signal to ignite the burner.
Works so far. easy to install and for the price it works great
So easy to replace and saved us easily $200. Thanks to teen children who found it inexplicitly necessary to HAMMER the buttons of the stove, the display failed. They had broken some tabs and the plastic overlay on the buttons was cracked. I thought i would replace the overlay and use the oem display but upon removal I found it was too damaged to do just that. I found this, and was skeptical as the oem, no overlay, was over 250, 50 extra for the overlay sticker. This seemed too good to be true. It arrived and the board looked totally different, MUCH less components. I installed it with a feeling that “No way this is going to work”. But, it worked like a charm, for less than the stupid button overlay sticker I had the stove fixed back to like new. The unit has been working for well over 6 months, and it works perfect. Save yourself some money, take a chance like I did, you won’t regret it.
Works. Easy to install works good hope it lasts
Working. Product install was reasonable, face plate isnt a match but its reasonable – screen clean.Timer doesnt turn off when you clear it, you have to manually turn it off